Dental Light Cure Composite Kit Universal 6 Shade A1/A2/A3/A3.5/B1/B2 Item NO.: 10702088@

COLOR: A1,A2,A3,A3.5,B1,B2

• INDICATIONS FOR USE:
  Direct restoration for all class caries.
  Restoration of teeth defect and veneer.
• 
  1SET Package:
  REFILL:
  Light Cure Composite: 4g/Syringe*5
  Syringe Needles : 5pcs/ box*1
  Total Etching Adhesive: 5ml/Bottle*1
  Etching Gel: 2.5ml/Syringe*1
  Applicators Brushes: 20pcs/box*1
• Net weight:188.4g
  COLOR: A1,A2,A3,A3.5,B1
• 
  FEATURES & ADVANTAGES:
• 
  Unique dispersion technology ensure the filler evenly distributed
  Radioopaque and fluoride releasing Optimal polishability and high shade stability.
  Excellent handling, not sticky to instrument;
  Suitable for most cases of restoration, extensive indication of usage.
• 
  
• 
  INSTRUCTIONS：
• 
  (1)Preparation: isolate and prepare tooth.
  (2)Cleaning: rinse the preparation with water.
  (3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
  (4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):
  dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
  (5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
  (6)Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
  (7)Finishing: after light cure, adjust restoration.
  (8)Polishing: use polishing strip or disc to polish the surface