USD
Home>Instruments &Instruments>Ultrasonic Scaler &accessories>Dental ultrasonic LED piezo scaler with function of scaling endo and Periodontal
Dental ultrasonic LED piezo scaler with function of scaling endo and Periodontal

Dental ultrasonic LED piezo scaler with function of scaling endo and Periodontal Item NO.: LED piezo scaler

Write a Review
US$ 228.00
Quantity

Copy and share this link on social network or send it to your friends

Copy
  • LED piezo scaler with function of scaling endo and Periodontal
Product Name Dental ultrasonic LED piezo scaler with function of scaling endo and Periodontal
Item NO. LED piezo scaler
Weight 0.8 kg = 1.7637 lb = 28.2192 oz
Category Instruments &Instruments > Ultrasonic Scaler &accessories
Brand Bomaoer
Creation Time 2018-03-28

Performance technical specifications

Adapter input:230V AC 50/60Hz 150mA

Main Unit input: 24VDC 1.3A

Main Unit fuse: 250V/T 1.6AL

Output power:3W to 30W

Output primary tip vibration excurision: <=100um

Output tip Vibration Frequency:28kHz+-3KHz

Output half-excursion force: <2N

Water pressure: 0.01Mpa to 0.5Mpa(0.1bar to 5 bar)

Weight of Main Unit: 0.65kg

Weight of adapter: 0.8kg

Operating model: continuous operation

Classification 93/42/EEC: class 2a

Electric shock protection type: class 2

Degree of protection against electric shock: B

Degree of protection against harmful ingress of water: ordinary equipment(IPX0), Foot switch(IPX1)

Degree of safety of application in the presence of flammable anesthetic mixture with air or with oxygen or nitrous oxide: Equipment not suitable for being used in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide

 

The conditions of working environment

Environmental temperature: +10C to +40C

Environmental humidity: 0 to 80%

Atmospheric pressure:700hPa to 1060hPa

 

Usage:

1.      Open the packing, make sure that all the parts an accessories are complete according to the packing list. Take the main unit our of the box and put it on a stable plane.

2.      Turn the water control switch to the max based on symbol as shown.

3.      Insert the plug of the foot switch to its socket

4.      Connect one end of the water pipe to the water entrance, lock the water pipe tightly with locknut, and connect the other end to the pure water source.

5.      Select a suitable scaling tip as you need and screw it on the handpiece tightly by the wrench.

6.      Turn off the main unit power, then insert the plug of the power source, and then get through to the power.

7.      Turn on the power button, and start the machine.

8.      Press the function button to choose scaling, periodontal or endo mode.

a)      After start the machine, the default initial state is scaling function, and scaling indicator lights

b)     Vibration intensity: adjust the vibration according to the equipment. Generally adjust to 3 to 4 degree, but also adjust vibration intensity according to patient’s sensitivity and hardness of dental calculus at any time in the clinical course.

c)      Water volume adjustment step on the foot switch and the tip vibrates, and then turn the water control switch to form fine spray to cool handpiece and clean teeth.

d)     Generally, hold the handpiece in the gesture as a pen in hand

e)      In clinical scaling, don’t use the point of tip to contact with the teeth vertically, so as not to damage teeth and tip.

f)       The normal frequency is extremely high. Under the normal working state of scaling tips, a light touch and a certain to-and-fro motion will eliminate the tartar without heating. Overexertion and long-time lingering are forbidden.

Periodontal function

a)      Press “OPTION”button, switch to periodontal function, then PERIO model, indicator lights.

b)     After switching to periodontal function, select the right tips, and use wrench to fix it an the handpiece.

c)      Adjust the frequency based on current status, it can be periodontal scaling after adjusting the right frequency.

Endo function

a)      Press”OPTION”button, switch to endo function, and endo indicator lights.

b)     Use endo wrench to fix video chuck to handpiece.

c)      Loosen the nut of endo chuck

d)     Insert endo files in the front hole of the endo chuck and use endo wrench to tighten the nut so as to clamp the files.

e)      Put the endo files into patient’s root canal slowly, start the foot switch can conduct ultrasonic root canal therapy. In clinical treatment, adjust the frequency according to actual situation.

9.      After finishing operation, keep the machine working for 20-30 seconds on water supply condition in order to clean the handpiece and tips.

10.   Uninstall the tip, sterilize handpiece, tips, endo chuck, endo files and wrench.

Note: please don’t pull out the handpiece and tips when the root switch is stepped on and the machine is producing ultrasonic vibration.

No related record found